LG Electronics LGE-HB-136-40-18700-90D LED High Bay Smart Control Sensing 136w IP65

LG Electronics LGE-HB-136-40-18700-90D LED High Bay Smart Control Sensing 136w IP65

This fixture will forever change your view of lighting possibilities.  The fixture is the most advanced and cost effective fixture presently on the global market.  This highbay features an optional wireless dongle or wireless occupancy and daylight harvesting control.  Utilization of the control can lead to energy savings in the range of 85% with projected paybacks in the 2 year range depending on settings and energy variables.  The wireless control uses open source Zigbee wireless mesh.  The fixture can be controlled with dimming as low as 5%.  Step dimming controls can be programmed with the added feature of controling top level output.

Included: 2 Carabiners for easy hanging

*Qualifying companies can demo a fixture with deposit.  Price shown is list price, discounted rates available.

SYSTEM:
While most smart systems presently cost thousands of dollars we have accomplished the same feat for under $200.  The system requires a hub to connect the network, (contact us for the hub information, not published).  You also will need to download a free control app to either an Iphone or Android Smart Phone.  The phone then controls the whole system.  The system is secured and password protected so pranksters can't leave you in the dark.

Example 1 Grouping and Time Control:

A grouping of 10 fixtures can be all programmed to act as a singular unit.   The 10 fixtures can be programmed to turn on at 9 am and dim to 40% at 10pm.   A third step could be to have them turn off at 10:30pm giving workers time to safely leave the faciltiy.

Example 2 Grouping and Motion Sensing:

A fixture or grouping of fixtures can be programmed to turn on from 30% to full power 100% when motion is sensed.   The top level control can be modified so that when motion is sensed the fixture(s) would only power to 90%.   When motion is no longer detected, the fixture(s) would then go back to the original step dim setting 30%.

Example 3 Motion Sensing, Time Control, Daylight Harvesting and Mass Grouping:

We have 3 groupings of fixtures in a facility.  The first grouping of 50 fixtures turns on/off at the settings of 8 am and 9 pm.  The second group of 35 fixtures are using motion sensing with step dimming.  They turn on/off at 8 am and 9 pm.  The power up to 30% until motion is detected then power up to 100%.   The third group of 15 fixtures uses motion to power on to the initial 20%, when motion is detected they power up to 80% as the light output in this area is too much.   All fixtures with sensors would also step dim at will whenever sunlight enters and provides more light than is needed in the room.  All three groupings turn off at 9 pm.

While 3 basic examples have been given, their are an infinite number of possibilities for control settings.  The parameters are open based on if-then event statements and area groupings.   We can even set up your system for you if you wish.

Features: 

• High system efficacy up to 106 lm/W, short payback
• Light weight for easier handling & installation
• Added energy savings by multi(occupancy & daylight) sensor, wireless controls
• IP65 rated construction applicable to moist and dusty environment
• Reliable operation in environments from -22 °F to 122 °F
• Selection of medium, wide beam products to fit installation height
• Lumen maintenance of L85 at 50,000 hours
• 5-years warranty