LSI Industries Legacy LED 159 Watt VHO Canopy Light Fixture CRUS SC LED VHO 50 UE WHT

Be the first to review this product

Quick Overview

The Legacy LED Canopy fixture is the latest innovation in LED canopy lighting

 Purpose Built • Performance Driven • Stunningly Attractive

• During the day the CRU disappears, assuring that attention goes to your marketing elements, not the canopy fixture
• Full panel brilliance, properly scaled to your canopy, with no annoying gaps or glaring diode point sources
• High Performance, Low Cost – most cost-effective LED canopy fixture in the marketplace
• Designed for utility and/or DLC approval and rebate participation

Add Items to Cart



THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature.

HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal.

LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal).

DRIVE CURRENT - Choice of High Output (HO) or Very High Output (VHO).

OPTICS / DISTRIBUTION - Choice of Symmetrical or Asymmetrical, which directs light through a clear tempered glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces.

OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.

PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.

HAZARDOUS LOCATION - Designed for lighter than air fuel applications. Product is suitable for Class 1 Division 2 only when properly installed per LSI installation instructions.

DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output. LSI driver components are fully encased in potting for IP65 moisture resistance. Complies with IEC and FCC standards. Surge protected at 10KV.

DRIVER HOUSING - Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available. Seals to optical housing via one-piece molded silicone gasket.

OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)

ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.

FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat
process. DuraGrip withstands extreme weather changes without cracking or peeling.

INSTALLATION - One person installation. No additional sealant required. Installs in a 12” or 16” deck pan. Deck penetration consists of a 4” hole, simplifying installation and water sealing. Unit is designed to quickly retrofit into existing Scottsdale (4”) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit. Retro panels are available for existing Encores (see back page) as well as kits for recessed and 2x2 installations (see separate spec sheets). Support brackets are provided standard, to prevent sagging of deck.

SHIPPING WEIGHT - 25 pounds (single pack), 50 pounds (double pack).

EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

WARRANTY - Limited 5-year warranty.

LISTING - UL and ETL listed to UL 1598, UL 8750 and other U.S. and International safety standards. Suitable for wet locations.

PHOTOMETRICS - Applications layouts are available upon request. 

Old Part Number:  CRU SC LED VHO CW UE WHT


Manufacturer LSI
Watts 159 Watts
Lumens 22418
Lumens Per Watt 141
CRI 70
Color Temperature 5300 Kelvin
Beam Angle 160°
Input Voltage 120V-277V
Rated Life 100,000 hours +
Minimum Operating Temperature -40°C or -40°F
Maximum Operating Temperature 50°C or +122°F
Dimensions 15 15/16” x 15 15/16” x 7 1/8"
Certifications , , ETL Listed, , , , , ,
Manufacturer Warranty 5 Year
UPC Code No
Specification Sheet

 CRU Data Sheet

Lead Time Build Item 2-3 Weeks


Only registered users can write reviews. Please, log in or register


Use spaces to separate tags. Use single quotes (') for phrases.