More Views

LSI XLCM Slice Area LED Light HO 278w

Be the first to review this product

Quick Overview

LSI XLCM Slice Area LED Light HO 278w

Slice LED area lights give you the best possible lumens per dollar in the marketplace. With its super sleek, low-profile housing and sophisticated high performance optics, the Slice is the perfect parking lot lighting solution. Available in two fixture sizes, with a choice of reflectors and drive currents, the XLCS provides up to 15,700 lumens while the XLCM provides over 31,100 lumens. XLCS is the ideal replacement for 400W metal halide while the XLCM can replace up to 1000W Metal Halide. These low profile fixtures, with the optical assembly less than 2” thick, have very low EPA, allowing the use of lighter gauge pole


Choose the light distribution pattern. See specs for lumen details

Choose your LED color temperature

Choose your fixture color

Optional Accessories

* Required Fields



LSI XLCM Slice Area LED Light HO 278w

XLCM Light Output FT Lumens 5 Lumens Watts
CW SS 22800 22900 193
HO 30900 3110 278
NW SS 18400 18500 193
HO 24100 23900 278

SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.

ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by others. Available with High Output (HO) drive current only.

EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

LEDS - Select high-brightness LEDs in Cool White (5000K nominal), or Neutral White (4000K nominal) color temperature, 70 CRI (nominal).

DISTRIBUTION/PERFORMANCE - Types FT, FT-L, FT-R and 5. FT-L and FT-R allow for D180 mounting configurations with factory set optics for applications such as automotive front row. Exceptional uniformity creates bright environment at lower light levels. Internal Louver (IL) option available for improved backlight control without sacrificing street side performance for FT distribution. Consult factory for internal louver for FT-L and FT-R applications.

HOUSING - One-piece, die-formed aluminum housing contains factory prewired driver. Wiring access door (with safety lanyard) located underneath.

OPTICAL UNIT - Clear tempered flat glass lens permanently sealed to weather-tight aluminum optic frame creates an IP65 rated optical unit (includes pressure-stabilizing breather).

MOUNTING - Tapered rear design allows fixtures to be mounted in 90° and 120° configurations without the need for extension arms. Use with 3” reduced drilling pattern. A round pole plate is required for mounting to round poles. Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR). Proprietary pole quick mount accessories available with horizontal mounting or fixed 15° angled mounting (PQMH-KIT-CLR and PQM15-KIT-CLR) for mounting to square poles. See Accessory Ordering Information chart for all brackets.

ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277 VAC (50/60Hz input), and 347-480 VAC. Optional buttontype photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).

DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents. Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.

OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)

FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.

WARRANTY - LSI LED fixtures carry a limited 5-year warranty.

PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data.

SHIPPING WEIGHT (in carton) - One fixture: 25.25 lbs. (11.5 kg). Packed two per carton:43.5 lbs. (19.7 kg).

LISTING - UL listed to U.S. and international safety standards. Suitable for wet locations. For a list of the specific products in this series that are DLC listed, please consult the LED Lighting section of our website or the Design Lights website at www.designlights.org.


Manufacturer LSI
Watts 278 Watts
Lumens 31100
Lumens Per Watt 112
CRI 70
Color Temperature 4000 Kelvin, 5000 Kelvin
Beam Angle 140°
Input Voltage 120V-277V
Rated Life 100,000 hours +
Minimum Operating Temperature -40° F
Maximum Operating Temperature 122° F
Dimensions 34.3125" x 19.3125" x 4.875"
Manufacturer Warranty 5 Year
Certifications , , , , , , , , , ,
Specification Sheet

 XLCM Data Sheet

Lead Time Build Item 2-3 Weeks


Only registered users can write reviews. Please, log in or register


Use spaces to separate tags. Use single quotes (') for phrases.